I am having trouble accessing http://holly2010:8080.home/sabnzbd/login/ from remote devices outside my local network. There are some threads about it here, but no solution.
However, Let’s see if this information of http://holly2010:8080.home/sabnzbd/login/ can help, as I don’t like using unsecured transmissions over the internet.
Table of Contents
For reference Of http://holly2010:8080.home/sabnzbd/login/
Also, the http://holly2010:8080.home/sabnzbd/login/ port is 8080, with port forwarding to 9998
The HTTPS port is 9090, with port forwarding to 9999
Username and password fix
Also, have a Dyndns account
From the calculator:
http://holly2010:8080.home/sabnzbd/login/ dns.dyndns.org:9998 -> WORKS
http://dns.dyndns.org:9998 -> WORKS
However, http://holly2010:8080.home/sabnzbd/login/
https://dns.dyndns.org:9998 ->ERROR: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error.
Also, http://dns.dyndns.org:9998/sabnzbd -> WORKS
dns.dyndns.org:9998/sabnzbd -> WORKS
dns.dyndns.org:9999 -> WORKS
Besides, http://dns.dyndns.org:9999 -> ERROR: Error 109 (net::ERR_ADDRESS_UNREACHABLE): Unable to connect to server. The URL changes to https://localhost:9090/sabnzbd
https://dns.dyndns.org:9999 -> WORKS http://holly2010:8080.home/sabnzbd/login/
https://dns.dyndns.org:9999/sabnzbd -> WORKS
Also, dns.dyndns.org:9999/sabnzbd -> ERROR: Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection. The URL changes to https://localhost:9090/sabnzbd
http://holly2010:8080.home/sabnzbd/login/ GNex Code
http://holly2010:8080.home/sabnzbd/login/ dns.dyndns.org:9998 -> ERROR: Could not establish a secure connection URL changes to https://localhost:8080/sabnzbd
http://dns.dyndns.org:9998 -> ERROR: Could not establish a secure connection URL changes to https://localhost:8080/sabnzbd
However, https://dns.dyndns.org:9998 -> ERROR: A secure connection could not be established
http://dns.dyndns.org:9998/sabnzbd -> WORKS
Also, dns.dyndns.org:9998/sabnzbd -> WORKS
dns.dyndns.org:9999 -> ERROR: Could not establish a secure connection URL changes to https://localhost:9090/sabnzbd
All About Error http://holly2010:8080.home/sabnzbd/login/
http://dns.dyndns.org:9999 -> ERROR: Could not establish a secure connection URL changes to https://localhost:8080/sabnzbd
https://dns.dyndns.org:9999 -> ERROR: A secure connection could not be established
Besides, https://dns.dyndns.org:9999/sabnzbd -> ERROR: A secure connection could not be established
dns.dyndns.org:9999/sabnzbd -> ERROR: Could not establish a secure connection URL changes to https://localhost:9090/sabnzbd
Also, Message on SABnzbd: Connection refused by: 10.173.1.186 [UPnP/1.0 DLNADOC/1.50 Platinum/1.0.5.13]
Connection rejected by: 10.173.1.186 [UPnP/1.0 DLNADOC/1.50 Platinum/1.0.5.13]
Solution to http://holly2010:8080.home/sabnzbd/login/
10.173.1.186 is a LAN address and is considered a LAN address:
>>> import several from sabnzbd
>>> misc.is_lan_addr(‘10.173.1.186’)
real
Why SAB Rejects http://holly2010:8080.home/sabnzbd/login/?
- A relatively large constellation of SONOS speakers operating in SONOS NET mode. I can see on the router that every device on SONOS has an IP address of 192.168.1.XX
- Two Nvidia Shield devices. Also, with IP addresses 192.168.1.XX.
I have connected some TVs wirelessly (also 192 addresses).
I only recently noticed this messaging behavior which has now stopped as it change from “NO ACCESS” to “FULL WEB ACCESS.”
Interestingly, I changed it back to “NO ACCESS,” and the messages came back. When I changed it back to FULL WEB INTERFACE, the letters stopped again.
Reason For Error
On my Synology NAS, I use EXPRESS VPN as the network interface (in a bonded connection).
I just disabled the VPN http://holly2010:8080.home/sabnzbd/login/, and the messages stopped immediately. (with NO ACCESS setting)
Then I re-enabled the VPN, and oddly the messages didn’t start again. (with NO ACCESS setting)
I’ll keep watching this to see if anything changes again, but that seems to have solved it.
Web UI Login
http://holly2010:8080.home/sabnzbd/login/ in Chrome on Android to login to sabnzbd up to this latest version. I enter my name and password, the monitor refreshes, and then I am prompted for the login screen again. The issue only exists with Chrome on Android, but it works fine with Firefox for Android.
However, when I access http://holly2010:8080.home/sabnzbd/login/ remotely (via NAT with the setting: External Internet Access = Full Web Interface), the login works, and the UI loads, but just as the loading process finishes, it returns the login page will appear.
Also, http://holly2010:8080.home/sabnzbd/login/ It appears to enforce authentication on local logins. Also, even when the General option is set to the opposite. No problem.
Conclusion
I use plush. Authentication is base on a cookie associated with your IP.
I am a developer and have found that cookies http://holly2010:8080.home/sabnzbd/login/ should never be associated with an IP. It is because IP addresses for the same user can change with each request (cellular connections, old AOL, etc.). It may explain my earlier problem with logging in from a smartphone.
http://holly2010:8080.home/sabnzbd/login/ While IP-Link can be overprotective, Sab allows you to access your PC and run scripts remotely. So if people don’t use HTTPS (and many don’t) and their cookies on a public Wi-Fi network, we want to limit usage as much as possible.
FAQS
http://holly2010:8080.home/sabnzbd/login/, http://holly2010:8080.home/sabnzbd/login/ , usenetreviewz.com, sonarr.tv, newsgroupreviews.com, usenet.com, nzbdrone.readthedocs.io, nzbgeek, nzbgeeks, couchpotato, drunkenslug, nzb geek, nzbindex, nbzgeek
Also Read: biharregd gov in
Related Searches:
[http://holly2010:8080.home/sabnzbd/login/]
[http://holly2010:8080.home/sabnzbd/login/]
[usenetreviewz.com]
[sonarr.tv]
[newsgroupreviews.com]
[usenet.com]
[nzbdrone.readthedocs.io]
[nzbgeek]
[nzbgeeks]
[couchpotato]
[drunkenslug]
[nzb geek]
[nzbindex]
[nbzgeek]
